Upgrading iPhone firmware using VMWare on Linux
Well that was a bit scary. I've just updated the firmware on my iPhone to 2.2 (the horrors!). Actually, this normally shouldn't be too much of a trial. The difference here is that I did it from Windows running inside VMWare on a Linux host.
I initially tried the naive approach of applying the update normally using iTunes (but running inside VMWware). Don't do this! The host (Linux) USB subsystem gets in the way leaving you with a somewhat useless iPhone in "recovery mode". It seems that the iPhone firmware upgrade procedure does something tricky with USB that doesn't play nicely with VMWare running on Linux.
To workaround the issue, some USB modules have to not be loaded on the Linux host during the upgrade. Extending the tips on Stephen Laniel's blog I created a blacklist file for modprobe that prevents certain USB modules from loading. Just unloading the modules manually isn't enough. The iPhone reconnects to the USB bus at least once during the upgrade process causing udev to reload the modules you've manually unloaded.
So before attempting the upgrade, create a file named something like /etc/modprobe.d/blacklist-usb with the following contents:
blacklist snd_usb_audio blacklist usbhid blacklist ehci_hcd
I'm not sure if ehci_hcd needs to be disabled, but I did this in my case.
Reload udev so that it knows about the new modprobe config file:
sudo /etc/init.d/udev reload
Now make sure these modules aren't already loaded:
sudo /sbin/modprobe -r snd_usb_audio sudo /sbin/modprobe -r usbhid sudo /sbin/modprobe -r usbhid
Now go back to VMWare, cross your fingers and attempt the firmware upgrade using iTunes. Things should progress along slowly.
You might find that at one point during the upgrade that iTunes sits there with a dialog saying "Preparing iPhone for upgrade". If this goes on for several minutes it could be that the iPhone isn't connected to VMWare anymore. iTunes is just waiting for the device to appear. If this happens, reattach the iPhone to VMWare using the "Removable Devices" option on VMWare's VM menu. It's a good idea to occasionally check that the iPhone is connected to VMWare during the upgrade.
Once the upgrade is complete you can remove the modprobe config file and reload VMWare:
sudo rm /etc/modprobe.d/blacklist-usb sudo /etc/init.d/udev reload
For the record, this was done using iTunes 8 running on Vista running inside VMware Workstation 6.5.0 build-118166 on Ubuntu Intrepid (8.10).
posted: Wed, 31 Dec 2008 11:07 | permalink | comments
All contacts in sync (+1 for the iPhone)
So new employer has given me an iPhone and despite my dislike of vendor lock-in I really like it.
One thing I've now managed to achieve is a single, central set of contact data. Like most geeks I had people's email addresses, phone numbers and postal addresses scattered across various devices and email profiles. In my case this included a Nokia 6130, my laptop's Thunderbird profile, various work Thunderbird profiles, my Gmail account and my trusty old Palm Tungsten E2. None of these stores of contact data were being synced. Contacts were added haphazardly as required.
No longer. The mess has been solved through the use of a variety of tools.
Getting an iPhone was the tipping point. Suddenly it was possible to sync contact (and calendar) data over the air, without needing to connect to a PC. This is very attractive to me. I like being able to sync even when away from the computer where iTunes is installed. I'm using the excellent (and free) NeuvaSync service for this. It hijacks the iPhone's Microsoft Exchange support to push changes to contact data to and from Google Contacts.
I've chosen Google Contacts as the central storage point for this data because it's reliable, I already have a populated gmail account and (mainly) because of the large number of tools that can interface with it.
Syncing to the various Thunderbird instances I use is done using the Zindus extension. This syncs Thunderbird's address book with Google Contacts. It works fairly well as long as you remember to stick to Google's rules about contact entries (eg. email addresses must be unique across all contacts). It will warn you if there's a problem.
So, that covers syncing contact data to everywhere I need it: iPhone, Gmail and Thunderbird.
The final challenge was to pull together all the contact entries I had around the place and merge them into Google Contacts. This was a long and messy process that was helped by some adhoc Python hacking. To get the data out of my Palm I used the pilot-address tool that ships with the pilot-link package. The excellent Gnokii tool pulled the contacts out of my Nokia (over Bluetooth, no less!). I wrote some Python scripts to help merge the highly imperfect sets of data, trying to make intelligent guesses where possible. Finally, OpenOffice Calc was used to manually fix the CSV before importing into Google Contacts.
It took a long time and many editing iterations but I now have a clean, centralised set of contacts. Say what you like about me needing to get out more, but I think this is awesome (and it was a worthwhile learning process).
posted: Sat, 25 Oct 2008 19:35 | permalink | comments